The TMHC 110E is a hydraulic puller kit that comnbines a jaw puller and a strong back puller. The kit includes two arm sets with different lengths that can be used in 2-arm or 3-arm configuration and a back puller with a maximum reach of 250 mm (9.8 in.). The hydraulic spindle with safety valve enables safe and effortless dismounting for various bearings and components. The spring-loaded centre piece and self-locking puller arms further support safe and easy puller operation.
• Versatile kit with two different arm lengths usable in 2-arm or 3-arm configuration and strong back puller
• Effortless dismounting with hydraulic spindle
• Self-locking arms minimise risks of slippage under load
• Spring-loaded centre point allows easy puller centring
• Supplied with two hydraulic spindle extension pieces to allow quick adaptation to required pulling length
• Hydraulic spindle is equipped with safety valve to prevent puller overload
Specification
| Manufacturer Product Code | TMHC 110E |
|---|---|
| Basic Product Description | Hydraulic bearing puller set |
| UOM | Kit |
| Shaft diameter | 20-100mm |
| Weight (Kg) | 13.5 |
| Kit Contents | 1 x arm-assembly stand 3 x arms, set 1 (TMHP10E-9) 3 x arms, set 2 (TMHP10E-10) 1 x separator set 1 x beam 2 x main rods 2 x extension rods, 125 mm (4.9 in) 1 x hydraulic spindle TMHS 100 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) 1 x nosepiece with centre point for hydraulic spindle |
| Effective arm length/Reach | 115mm (Jaw puller effective arm length); 250mm (Strong back puller reach) |
| Maximum withdrawal force (kN) | 100 kN |
| Puller Type or Accessories | Hydraulic Pullers |
| Series | TMHC |
| EAN code | 7316572298442 |
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
To complete your return, we may require a receipt or proof of purchase.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
The TMHC 110E is a hydraulic puller kit that comnbines a jaw puller and a strong back puller. The kit includes two arm sets with different lengths that can be used in 2-arm or 3-arm configuration and a back puller with a maximum reach of 250 mm (9.8 in.). The hydraulic spindle with safety valve enables safe and effortless dismounting for various bearings and components. The spring-loaded centre piece and self-locking puller arms further support safe and easy puller operation.
• Versatile kit with two different arm lengths usable in 2-arm or 3-arm configuration and strong back puller
• Effortless dismounting with hydraulic spindle
• Self-locking arms minimise risks of slippage under load
• Spring-loaded centre point allows easy puller centring
• Supplied with two hydraulic spindle extension pieces to allow quick adaptation to required pulling length
• Hydraulic spindle is equipped with safety valve to prevent puller overload
Specification
| Manufacturer Product Code | TMHC 110E |
|---|---|
| Basic Product Description | Hydraulic bearing puller set |
| UOM | Kit |
| Shaft diameter | 20-100mm |
| Weight (Kg) | 13.5 |
| Kit Contents | 1 x arm-assembly stand 3 x arms, set 1 (TMHP10E-9) 3 x arms, set 2 (TMHP10E-10) 1 x separator set 1 x beam 2 x main rods 2 x extension rods, 125 mm (4.9 in) 1 x hydraulic spindle TMHS 100 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in) 1 x nosepiece with centre point for hydraulic spindle |
| Effective arm length/Reach | 115mm (Jaw puller effective arm length); 250mm (Strong back puller reach) |
| Maximum withdrawal force (kN) | 100 kN |
| Puller Type or Accessories | Hydraulic Pullers |
| Series | TMHC |
| EAN code | 7316572298442 |
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
To complete your return, we may require a receipt or proof of purchase.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery